To our customers:
Coordinated Equipment Company has hundreds of items of used and surplus
equipment for sale, from machine tools to earthmoving equipment. We
also rent test weights, winches, lifting and spreader bars, and complete
rigging packages. We have one of the largest inventories of rental winches
on the West Coast. Click on any of the categories below to see a complete
inventory of what we currently have in stock. If you do not see what
you are looking for in our catalog, please give us a call or send us
a note. Chances are we can find it for you or know someone that can.
| Equipment
Type: |
Winch, Electric, 18,000 LBS |
| Description: |
American Three Drum, 180, with 110 KW drip proof AC motor(125 HP) 440 V. Excellent Condition. Gear teeth and brakes show very little wear. paint is good. Grey |
| Year
& Model: |
American 180 |
| Serial:
|
|
| Item
Number: |
0330cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/0330cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 500 LBS |
| Description: |
500 LB, Rightway, 50 FPM 220/440. Small winch. Est. Weight, 100 LBS |
| Year
& Model: |
R50.5.P |
| Serial:
|
7310WB |
| Item
Number: |
0515c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Electric Winch, Hoist or Car puller. Drum is 42" long, 28" flange, grooved for 1" wire rope. One wrap only. A 7.5 HP Allis Chalmers, 1800 RPM, 220/440 3 phase motor, is coupled to a Philadelphia Gear Right Angle Gear Box, with a 2864:1 reduction. (1800 RPM in- 0.628 RPM out< model 1400 DA, SN 101039.) Has an electrically activated holding dog on it and a double vertical deck sheave for guiding the wire.Width (parallel to length of drum) of Skid- 78" Front to back length of skid 74". Over all height is 53". Estimated weight is 5000-5500 lbs |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
0530cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/0530cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 4000 LBS |
| Description: |
4000 LB., estimated. Skid Mounted , Electric AC motor, 440V, Reliance Frame 213, 1750 RPM, 3 HP, 4.5 Amps, Squirrel Cage,. Motor to reducer, chain drive, reducer to winch, chain drive. On shelf. |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
0748c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 4000 LBS |
| Description: |
Joy, 2000 LBS-4000 LBS 460 V, with push button controls. About the same size as IR HU. rated at 2000 Lbs, mid drum, but we have we've hoisted 4000 LBS on it. |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
0767cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/0767cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Linkbelt. 5 HP, with double gear reduction on it. Will spool approx 5000' of 1/2" Wire rope. 1: 31.4 reduction off of 5 HP motor. Has dog clutch for free whelling. Skid mounted, Red |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
0779c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Garwood winch, powered by 220/460 V, 5 HP motor. Chain driven on skid with rollers, probably good for 3000 LBS. |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
0791cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/0791cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Winches with 20:1 Philadelphia gearboxes. input 1800 RPM, output .90 RPM. Drums are 30" grooved for 1" rope and each drum has 40 grooves, so two wraps should hold 40'. Need switch and lagging. |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
0841c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 2100 LBS Tricing type |
| Description: |
Thern, Electric tricing winch. Excellent condition, ex government and was probably not used. 70" length over the three drums. 2nd layer rating is 2100 LBS, Full drum rating is 1600 LBS. 220/3/60/50 power. Electric motor is 1715 RPM, 2 HP. 3 phase 200v to 460 v. Has an electric brake and a rotary limit switch. Gearbox is an Excello cone drive type. Input RPM- 1750 RPM, 2.17 HP, 120: 1 ratio. Model HU35 A 900-1 |
| Year
& Model: |
4HW35-70L |
| Serial:
|
40850804 |
| Item
Number: |
0855cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/0855cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Capstan, Electric |
| Description: |
4 available. Electic Capstan Winches. Modern Engineering Co., with Fairbanks Morse QLMZD Frame JE 404 , 15 HP motors.Gearbox is 163:1 reduction. With Corner anchors for mounting to steel or into concrete foundations. With 3 phase 60 cy 440 V, 2 speed (750 or 1500 RPM) , 15 HP motors. Capstans are 35" tall, 32" diameter at the crown and 40" diameter at the base. The gearbox and motor stand is 92" long, 25" high and 28" wide. |
| Year
& Model: |
24-11 |
| Serial:
|
2000I 53 |
| Item
Number: |
0920cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/0920cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Capstan, Electric |
| Description: |
4 available. Electic Capstan Winches. Modern Engineering Co., with Fairbanks Morse QLMZD Frame JE 404 , 15 HP motors.Gearbox is 163:1 reduction. With Corner anchors for mounting to steel or into concrete foundations. With 3 phase 60 cy 440 V, 2 speed (750 or 1500 RPM) , 15 HP motors. Capstans are 35" tall, 32" diameter at the crown and 40" diameter at the base. The gearbox and motor stand is 92" long, 25" high and 28" wide. |
| Year
& Model: |
24-11 |
| Serial:
|
2000I 53 |
| Item
Number: |
0920cp2 |
| Picture: |
http://www.ceccwrr.com/images/catalog/0920cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch |
| Description: |
Bayard, with Capstans on ends, Induction Motor, 3.25 HP for 4 hours, 33 HP for 1/2 hour |
| Year
& Model: |
Bayard |
| Serial:
|
|
| Item
Number: |
0942c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Electric winch with power in and sliding clutch, Breaker box. 3 phase. Will hold about 500' of 3'8" wire rope. Probably good for 3-4000 lbs line pull |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
0998cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/0998cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Joy Slusher type winch, with 30 HP motor. |
| Year
& Model: |
B2F311 |
| Serial:
|
34757 |
| Item
Number: |
1121c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Sullivan Electric Winch |
| Year
& Model: |
|
| Serial:
|
|
| Item
Number: |
1122c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Capstan, Electric |
| Description: |
3 available. Electic Capstan Winches. Modern Engineering Co., with Fairbanks Morse QLMZD Frame JE 404 , 15 HP motors.Gearbox is 163:1 reduction. With Corner anchors for mounting to steel or into concrete foundations. With 3 phase 60 cy 440 V, 2 speed (750 or 1500 RPM) , 15 HP motors. Capstans are 35" tall, 32" diameter at the crown and 40" diameter at the base. The gearbox and motor stand is 92" long, 25" high and 28" wide. |
| Year
& Model: |
24-11 |
| Serial:
|
2000I 53 |
| Item
Number: |
1122cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/1122cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 3,000 lbs. |
| Description: |
Beebe Brothers, electric winch. 3,000 lb line pull. 1.5 HP, single phase 110/230 V motor currently set up for 110 V. With foot on/off control pendant and directional control box. Electronic disk brake. Approx. 50' power cord. Drum will spool about 600 LF of 3/8" or 280 of 1/2" wire rope. Has Reliance Master XL Gearmotor wit 144:1 ratio. Chain drive form motor to drum. Input is 1755 rpm, output is 12 rpm. Line speed is approx 15 fpm at mid drum. Tested to 3,750 lbs. 06/04. Excellent condition. |
| Year
& Model: |
Motor ID # 10313723-ZA |
| Serial:
|
Case # 182CG28A |
| Item
Number: |
1133cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/1133cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Joy Electric 3 drum Slusher winch, one of two, with 30 HP Westinghouse Electric motor |
| Year
& Model: |
B2F311 |
| Serial:
|
33117 |
| Item
Number: |
1166cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/1166cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Joy Electric 3 drum Slusher winch, one of two, with 30 HP Westinghouse Electric motor |
| Year
& Model: |
B2F311 |
| Serial:
|
34774 |
| Item
Number: |
1175cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/1175cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 50,000 LBS |
| Description: |
130,000 LBS holding capacity. Letourneau Anchor winches. 50,000 LBS line pull, Line speed is 19.39 FPM or 38 FPM, 1st wrap.
Single drum holds 3000' of 1-1/4" wire rope, or 2000 LF of 1-1/2". 30 PH motor. (Winch can be repowered.) Elecromagnetic multiple disc brakes. 14 Face, 6 segment. Drive pinion 12 tooth, 8 pitch. 900-1200 RPM. Dimensions are 8'2" high, 6'11" wide, 8' 2" long. Estimated weight is 17,000 LBS. These can be repowered for Dsl or Hydraulic. Several available. Photo shows a rebuilt unit. |
| Year
& Model: |
AW-1500 |
| Serial:
|
|
| Item
Number: |
1220crassp |
| Picture: |
http://www.ceccwrr.com/images/catalog/1220crp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric |
| Description: |
Slusher, Two Drum, Joy model E111 |
| Year
& Model: |
E111 |
| Serial:
|
14413 |
| Item
Number: |
1259c |
| Picture: |
|
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 8000 LBS, Slusher |
| Description: |
Double Drum, side by side. Est. 12000 LBS/Drum. 4 HP with very large gear reduction. Controls and electroinics rebuilt in 1998. Electric Brakes. Each Drum will hold approx 800' of 3/4" wire rope. |
| Year
& Model: |
OMP MEP 300D, 1983 |
| Serial:
|
|
| Item
Number: |
C0001Cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/C0001p.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 1,000 lbs. |
| Description: |
Huges Backer 1,000 lbs. Electric winch. Dresser 3/4hp, 3 phase 460/V motor. PTO output shaft. Drum will spool about 200' of 3/8" wire rope. Drum L=10" Core= 3" core, Flange = 3", Line speed approx. 28 pfm, Load tester to 1,125 lbs. 9/19/03. Test certificate available. Foot print 23"x10". |
| Year
& Model: |
Model AW1000 |
| Serial:
|
73435-W-6 |
| Item
Number: |
L1139cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/L1139cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 4,000 lbs |
| Description: |
Ramsey Tulsa 4,000 lbs. Electric winch. G.E. 5hp, 3 phase 208-220/440 motor with voltage selector switch. Brake and Dog. Drum will spool about 320' of 5/8" wire rope. Drum L=15" Core= 5" core, Flange = 5" on a 1 1/4" shaft, Line speed approx 40 fpm, Load tester to 5,000 lbs. 9/19/03. Test certificate available. Foot print 48"x38". |
| Year
& Model: |
Ramsey Tulsa |
| Serial:
|
|
| Item
Number: |
L1140cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/L1140cp.jpg |
| |
|
| |
|
| Equipment
Type: |
Winch, Electric, 10,000 lbs. |
| Description: |
Jeamar, Ultra low speed electric winch. 10,000 lb line pull. 2fpm. 2 HP 230/460 Siemens syunduction motor. Stearns Electronic disk brake. Drum will spool about 360 LF of 3/4" wire rope. Excellent con. |
| Year
& Model: |
1992 Mod. E10000T-S |
| Serial:
|
3085 |
| Item
Number: |
L1967cp |
| Picture: |
http://www.ceccwrr.com/images/catalog/L1967cp |
| |
|
| |
|
|
